Agilent Technologies Infiniium 80000 Series Service Manual page 117

Chapter 6: Replacing Assemblies
To remove and replace the keyboard, touch screen, and flat-panel display assemblies
To remove the main keyboard assembly, disconnect the cursor keyboard interconnect
5
cable, pull off the knobs, and lift out the keyboard.
Figure 6-16
Keypad
Removing the keyboard
To remove the touch screen assembly from the front-panel cover plate, remove the six
6
T8 Torx fasteners.
To remove the flat-panel display assembly, remove the backlight inverter board (see
7
page 111), then remove the four T8 Torx fasteners.
Figure 6-17
Removing the touch screen and flat-panel display
116
Label
Knobs
Touch screen
assembly
Main keyboard
Cursor keyboard
interconnect
cable
Flat-panel
display
Front-panel
cover plate