Taring - KERN ALJ Operating Manual

9.5 Taring

The empty weight of any container used for weighing can be tared, pressing the
button which results in displaying the net weight of the weighed material during
consecutive weighing processes.
 Place the scale container on the scales plate.
 Wait until the stabilization indicator is displayed [], and press the TARE
button. The "Tare" symbol will be displayed.
 Once the stabilization check is successfully completed, the zero symbol will be
displayed.
The container weight will be saved in the scale memory.
 Place the weighed material.
 Wait until the stabilization indicator is displayed [].
 Read out the net weight.
Tip:
• After the load is removed from the scale, the tare weight is displayed as
a negative value.
• To delete the saved tare value, remove the load from the scale plate and
press TARE button. The "Tare" symbol will be displayed. Wait until the
zero symbol is displayed.
• The taring process can be repeated any number of times. The limit is
reached when the complete weighing scope is used.
44 TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2011