Disposal; Help For Any Minor Failures - KERN ALJ Operating Manual

15.3 Disposal

The packaging and the device should be disposed in accordance with the national or
regional law in the location where the device is operated.

16 Help for any minor failures

If there are any programme execution problems, the scale should be switched off and
disconnected from the mains for a while. Next, the weighing process should be
started anew.
Help:
Problem
The weight indicator is not lit • The scale is not on.
The weight indication
keeps fluctuating.
The weighing result
is clearly wrong.
If there are any other error messages displayed, switch the scale off and then on
again. If the error message persists, contact the manufacturer.
96
Possible cause
• Interrupted mains connection (mains cable not
connected/damaged).
• Mains voltage failure.
• Batteries/rechargeable batteries
not placed correctly or discharged
• No batteries/rechargeable batteries.
• Draft / air movements.
• Table/air vibrations.
• The scale plate is in contact with foreign bodies.
• Electromagnetic fields / static discharge (select
another location / if possible, switch off the
interfering device).
• The scale indication was not reset.
• Incorrect adjustment.
• There are heavy temperature fluctuations.
• The heating time not observed.
• Electromagnetic fields / static discharge (select
another location / if possible, switch off the
interfering device).
TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2011