Transmission Speed - KERN ALJ Operating Manual

 Confirm the selection, pressing the PRINT button. The scale will be switched to
the menu again.
 Return to the weighing mode, pressing the ON/OFF button.

11.3 Transmission speed

 Using the navigation buttons , select the menu item <Baud rate>.
 Confirm by pressing the PRINT button, the current setting will be displayed.
 Using the navigation buttons , select the required setting.
It is possible to select 1,200, 2,400, 4,800 or 9,600 bauds.
 Confirm the selection, pressing the PRINT button. The scale will be switched to
the menu again.
 Return to the weighing mode, pressing the ON/OFF button.
TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2011
Symbol
<Continuous>
<On demand>
<Generic printer>
<Printer TLP>
<On demand – GLP>
<Generic print.-GLP>
<Printer Tlp – GLP>
Description
Continuous data transfer
Sending the stable weighing value after the
PRINT button is pressed
Sending data to
following the remote control request.
Sending data to the printer supporting the
LP-50 protocol.
The setting used
conforming to GLP, after the PRINT button is
pressed
The printout conforming to GLP on a
standard printer following the remote setting
request
The printout conforming to GLP on the
printer supporting the LP-50 protocol
the standard printer
to obtain printouts
51