Table of Contents
Advertisement
Quick Links
Model GVP20A
Instruction Manual for Vacuum Packaging Machine
Models GVP6, GVP20 and GVP20A
For all after sales support, visit www.globefoodequip.com
For additional Technical Support call Globe at 1-866-260-0522.
This manual contains important safety instructions which
Maintain and use this manual as a reference for training.
•
Complete the Warranty Registration
•
Find an Authorized Servicer
•
View Parts Catalogs
- IMPORTANT SAFETY NOTICE -
must be strictly followed when using this equipment.
Model #:
Serial #:
Date of
Purchase:
Advertisement
Table of Contents
Related Manuals for Globe GVP6
Summary of Contents for Globe GVP6
- Page 1 • Find an Authorized Servicer • View Parts Catalogs For additional Technical Support call Globe at 1-866-260-0522. - IMPORTANT SAFETY NOTICE - This manual contains important safety instructions which must be strictly followed when using this equipment. Maintain and use this manual as a reference for training.
- Page 2 Intentionally Left Blank...
-
Page 3: Table Of Contents
LIMITED VACUUM PACKAGING MACHINE WARRANTY ................20 GLOBE FOOD EQUIPMENT COMPANY 2153 DRYDEN RD DAYTON, OH 45439 PHONE: 937-299-5493 TOLL FREE: 800-347-5423 FAX: 937-299-8623 E-MAIL: info@globefoodequip.com WEBSITE: www.globefoodequip.com © Globe Food Equipment Company, 2020 Printed in USA 980293 11/13/2020 Ver 1_Rev. -... - Page 4 Intentionally Left Blank...
-
Page 5: Attention Owners And Operators
If you have any questions, please contact Globe at 866-260-0522. Throughout the manual you will see warnings to help alert you to potential hazards and to help promote safe use of this equipment. -
Page 6: Key Components Of The Vacuum Packaging Machine
Key Components of the Vacuum Packaging Machine Silicon Bar Nozzle Vacuum Chamber Sealing Bar Lid Lock Access Panel (on back) Display Vacuum Gauge Power Switch Power cord (on back) Foot On/Off Up Arrow Pump Cycle Display Button Button Button Set Down Arrow Button Button... -
Page 7: Globe Safety Tips
BEFORE CLEANING, SERVICING, OR REMOVING ANY PARTS always turn vacuum packaging machine OFF and unplug power cord. • ALWAYS properly clean and sanitize your vacuum packaging machine to prevent illness or death caused by the spread of food-borne pathogens. • USE ONLY PROPERLY INSTALLED GLOBE ACCESSORIES. Page 7... -
Page 8: Unpacking And Installation
8. Level unit by adjusting the four feet and tighten securely. The feet have an adjustment of one inch to line up with other Globe countertop products. Do not slide unit with legs installed: use two people to lift if necessary to move unit. - Page 9 Unpacking & Installation CONNECTING TO ELECTRICAL POWER THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG. THE OUTLET TO WHICH THIS PLUG IS CONNECTED MUST BE PROPERLY GROUNDED. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE THIRD GROUND PRONG FROM THE POWER CORD OR USE ANY ADAPTER PLUG (FIGURE 9-1 AND FIGURE 9-2).
-
Page 10: Operating Instructions
OFF and unplug unit. • KEEP unit UNPLUGGED when not in use to prevent accidental start up. VACUUM PACKAGING MACHINE OPERATION (MODELS GVP6 AND GVP20) Do not operate vacuum packaging machine without first checking/installing oil into the motor/pump. Damage to vacuum packaging machine will occur. - Page 11 Operating Instructions Note: The quality of the seal can be verified by checking that the seal is clear. If the seal is spotty or incomplete, increase the seal time by 0.1 second. If the seal appears white or milky, decrease the seal time by 0.1 second. 6.
- Page 12 Operating Instructions PROGRAM SETTINGS (MODEL GVP20A) 1. Turn on the ON/OFF switch. ON/OFF switch light will illuminate. Display will show Program number, time and date (Figure 12-1). 2. Select and hold the ON/OFF display button for 3 seconds to enter display settings (Figure 12- 2).
- Page 13 Operating Instructions 14. Once the set marinating time or vacuum percentage has been selected, close the lid to start the vacuum cycle. Note: The vacuum packaging machine will countdown the set minutes for marinating. 15. At the end of marinating, the vacuum packaging machine lid will open and the vacuum sealing bag will be sealed.
- Page 14 Operating Instructions Note: The vacuum packaging machine will allow the air to enter the vacuum chamber and the lid will open. Note: To stop the vacuum cycle and seal the vacuum sealing bag, select and hold the PUMP CYCLE button for 2-3 seconds. 8.
-
Page 15: Cleaning & Sanitizing
Cleaning & Sanitizing TO AVOID SERIOUS PERSONAL INJURY: • BEFORE CLEANING, SERVICING, OR REMOVING ANY PARTS, always turn vacuum packaging machine OFF and unplug unit. • NEVER attempt to clean vacuum packaging machine while vacuum packaging machine is in operation. •... - Page 16 Cleaning & Sanitizing VACUUM PACKAGING, CLEANING AND SANITIZING 1. Make sure the vacuum packaging machine is turned OFF and unplugged. Sealing Bar Do not place the sealing bar in a dishwasher, hand wash only. Damage to the sealing bar can occur. 2.
-
Page 17: Troubleshooting
Lid does not lift properly. Pistons are not properly placed inside of Call for service to adjust pistons. vacuum packaging machine. If problem continues and the above solution does not remedy the issue, please call Globe’s Service Department at 866-260-0522. Page 17... - Page 18 Intentionally Left Blank...
-
Page 19: Recommended Maintenance
Recommended Maintenance PART REQUIRED ACTION FREQUENCY Pump Check oil level on pump. If oil level is Every 10,000 cycles or when ''OIL'' low, apply pump oil to pump. appears on display. Check to make sure oil is clear. If oil When using the vacuum packaging begins to look “milky”... -
Page 20: Limited Vacuum Packaging Machine Warranty
Limited Vacuum Packaging Machine Warranty Globe Food Equipment Company (“GFE”) warrants to the original purchaser of new equipment that said equipment, when installed in accordance with our instructions within North America and subjected to normal use, is free from defects in material or workmanship for a period of 1 year on parts (excludes wear/expendable parts). The labor warranty is one year from original installation or 18 months from actual shipment date, whichever date occurs first.