Nbp Assembly With Manifold Hose - GE PDM Service Manual

NBP assembly with manifold hose

2030047-001A
1. Remove the top housing, main board, NBP hose, coupling and elbow per above
steps.
2. Remove 4 screws from the battery cover.
Front panel board connector
3. Grasp and slide the battery cover out to the rear.
4. Remove 1 screw under the pump tube connection.
5. Lift off the manifold with pump.
6. Remove the interface gasket.
Patient Data Module
Field Replaceable Units
Battery cover
Main board flex pump connector
467A
466A
7-13