Table of Contents
Advertisement
Installation
Installation
Register TLM to Tank in Pulse
Level Software
Navigate to URL: level.gracopulse.com
This device requires access to a cellular network to
work, and can be activated in Pulse Level. Refer to
Pulse Level terms of service in the About section of the
software.
After creating user, organization, branch and site,
navigate to Devices (located in the upper right corner of
the screen). Associate the device to your organization
by entering the serial number. When you create a tank
for the site, the device will be assignable.
Assign the TLM serial number to a tank in Pulse Level.
4
Activation
1. Hold the magnet (supplied) to the Hot Spot on the
side of the log device marked by a yellow sticker
(F
. 1).
IG
Hot Spot
F
. 1
IG
2. Keep holding the magnet to the Hot Spot. The log
device chirps once per second, and then sounds a
long beep.
3. Remove the magnet after the long beep.
4. There will be a series of short chirps until it
connects to Pulse Level.
3A8622B
Advertisement
Table of Contents
