Exterior Loading; Shipping Skid - Hussmann microSC VRL1B Installation & Operation Manual

Low temperature self contained glass door merchandisers with r-290 refrigerant
Table of Contents

Advertisement

P/N 3034040_H
UNLOADING
Unloading from Trailer:
Lever Bar (also known as a Mule, Johnson
Bar, J-Bar, Lever Dolly, or Pry Lever)
Move the merchandiser as close as possible
to its permanent location and remove
all packaging. Check for damage before
discarding packaging. Remove all separately
packed accessories such as kits and shelves.
Improper handling may cause damage to
the merchandiser when unloading. To avoid
damage:
1. Do not drag the merchandiser out of the
trailer. Use a Johnson bar (Mule).
2. Use a forklift or dolly to remove the
merchandiser from the trailer.
Do NOT stand or walk on top of
merchandiser. Do not store items or
flammable materials atop the unit.
Do not use mechanical devices or other means
to accelerate the defrosting process.
Do not use electrical appliances inside the food
storage compartments of the case.
Case ventilation openings must be clear of any
obstructions. Do not damage the refrigerant
circuit.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.

EXTERIOR LOADING

Do NOT walk on top of the merchandiser or
damage to the merchandisers and serious
personal injury could occur.
merchandisers are not structurally
designed to support excessive external
such as the weight of a person.
loading
Do not place heavy objects on the
merchandiser.

SHIPPING SKID

Each merchandiser is shipped on a skid to
protect the merchandiser's base and to make
positioning the case easier.
Remove the top of the crate and detach walls
from each other (if applicable). Lift crate from
the skid. Unscrew the case from the skid. The
merchandiser can now be lifted off the crate
skid. Lift only at base of skid! Remove any
braces and/or skids attached (blanket wrapped
merchandiser may have skids).
DO NOT TILT MERCHANDISER ON ITS
SIDE OR END WHEN REMOVING SKID.
Once the skid is removed, the merchandiser
must be lifted —NOT PUSHED— to
reposition. To remove the skid, remove screws
attaching skid to the merchandiser.
Check floor where merchandisers are to be set
to if it is a level area. Determine the highest
part of the floor.
7
VRL Merchandisers

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Microsc vrl2bMicrosc vrl3b

Table of Contents