Upgrading / Exchanging Main Memory - Fujitsu PRIMERGY BX620 S4 Options Manual

Upgrading / Exchanging Main Memory

6.2 Upgrading / Exchanging Main Memory
Ê Remove the server blade from the basic unit and open it as described in the
chapter "Preparation" on page
1
Figure 15: Removing a memory module
Ê Flip the fastening tabs on each side of the slot outward (1).
Ê If a memory module was already installed in the slot, remove it from the slot
(2).
1
Figure 16: Installing a memory module
Ê Flip out the fastening tabs on both sides of the slot (1).
Ê Carefully press the memory module into the slot (2) until the fastening tabs
on both sides of it engage.
32
17f.
2
2
Options Guide
Main Memory
1
1
BX620 S4