Fujitsu PRIMERGY BX620 S4 Options Manual page 52

Replacing a Storage Module
Removal
Figure 33: Undoing the Screws on the Storage Module
Figure 34: Removing the Storage Module
Installation
To install a storage module, follow the steps in the opposite order.
52
1
1
2
2
1
Options Guide
Ê Undo the two screws (1) which
fasten the storage module to the
frame of the server blade.
Ê Undo the screw (1) on the front
panel of the storage module.
Ê Open out the front panel in the
direction of the arrow (1). This
unlocks the storage module.
Ê Pull the storage module out of the
server blade chassis (2).
Storage Modules
BX620 S4