Fujitsu PRIMERGY BX620 S4 Options Manual page 9

Preface
1 Sockets for FBD memory modules
2 Heat sink of the first processor
3 Control panel board with foil cable
4 2.5-inch hard disk module 1 (SAS or SATA)
5 2.5-inch hard disk module 2 (SAS or SATA)
6 Storage module
7 Socket for second processor
8 Dummy heat sink
9 I/O daughter card (Fibre Channel or Gigabit Ethernet), optional
10 Lithium battery (on the system board)
11 DIP switch (on the system board)
I
The memory modules, the I/O daughter card and the storage module
must be installed in the server blade before it is placed in the basic unit.
DIP Switch Settings
The server blade comes with the DIP switches set in the following positions:
Switch Function
1 Delete password
2 Clear CMOS memory
3 Restore system BIOS
4 Not assigned
5 Switch for keyboard/mouse controller
6 Not assigned
Table 1: Preset DIP switches
BX620 S4
Structure of the Server Blade
Options Guide
Default
OFF
OFF
OFF
OFF
ON
9