Operating Additional Equipment; Connecting Recorders; Log In The Device; Video Playback - Loewe L 20 DVB-T Operating Instructions Manual

Operating additional equipment

Connecting recorders

1. Connect your antenna or cable connection to the recorder (1).
2. Connect the recorder to the Euro-AV sockets on the TV set if possible (2).
3. Connect the antenna output of the recorder to the antenna input of the TV
set (3). The antenna signal is then available to both the tuner in the recorder
and in the TV set.
220 - 240 V ~
3
2
ENTREE
ANTENNE
EURO AV2
DECODER
AUDIO
AERIAL
SORTIE OUT
G L
SORTIE
EURO AV1
ANTENNE
AUDIO/
VIDEO
D R
RF OUT

Log in the device

1. Call the TV menu.
2. Select "Connections".
3. Select the free connection (AV1, AV2
4. Select the device type you want to connect and its signal type in the connec-
tion wizard, e.g. "VHS/8 mm....VCR" for video recorder.
5. Confi rm with OK.
6. Select the colour norm of the video device. If you do not know it, select
"automatic".
7. Confi rm with OK.

Video playback

You get the best picture and sound reproduction when the recorder, DVD player
or camcorder is connected by an AV cable (Scart cable) to one of the AV sockets
of the TV.
When you are playing a video recorder, DVD player, camcorder or digital
camera, select the AV socket to which the video device is connected with "AV
selection" (button 0 AV) or with the station table.
Recorders transmit a switching voltage during playback which the TV set can
decode (set Connections – Switching voltage to "yes" in the TV menu). Then the
picture of the recorder is shown at the current channel position during playback.

Calling an AV program in the AV selection list

Call AV selection.
AV
Select AV socket for external video device.
1
OK
Call with OK.
OK
Now you will see the playback from the connected video device.
AV2 is not available in DVB-T models.
(1
(1 or AVS).
AV selection
AV1 AV2
AVS
OK
21 -