GreenWorks 2606502 Operator's Manual page 8

1.Stop machine. Release
the switch.
2.Unplug power cord.
3.Inspect for damage.
4.Repair any damage
before restarting and
operating the machine.
• Adjust the collector housing
height to clear gravel or
crushed rock surface.
• Never attempt to make any
adjustments while the
machine is running (except
where specifically
recommended by
manufacturer).
• Disconnect Machine –
Disconnect the machine
from the power supply when
not in use, before servicing,
when changing
accessories, and the like.
• Do not put hands or feet
near or under rotating parts.
Keep clear of the discharge
opening at all times.
• Exercise extreme caution
when operating on or
crossing gravel drives,
walks, or roads. Stay alert
for hidden hazards or traffic.
English
• After striking a foreign
object,turn the machine off
and remove the plug, and
then inspect it for damage.
Repair any damage before
restarting and using the
machine.
• If the unit should start to
vibrate abnormally, stop the
machine and check
immediately for the
cause.Vibration is generally
a warning of trouble.
• When cleaning, repairing, or
inspecting, make certain the
collector/impeller and all
moving parts have stopped.
• Exercise extreme caution
when operating on slopes.
• Never operate the machine
without proper guards, and
other safety protective
devices in place and
working.
• Never direct the discharge
toward people or areas
where property damage can
occur. Keep children and
others away.
• Stop the machine whenever
you leave the operating
position, before unclogging
9
EN