Risk Levels; Installation; Unpack The Machine; Install The Upper Handle - GreenWorks 2606502 Operator's Manual

Table of Contents

Advertisement

Available languages

Available languages

EN
Symbol
5

RISK LEVELS

The following signal words and meanings are intended
to explain the levels of risk associated with this product.
SYM-
SIGNAL
BOL
DANGER
WARNING
CAUTION
CAUTION
Explanation
Read and understand all instruc-
tions before operating the prod-
uct, and follow all warnings and
safety instructions.
Thrown objects can ricochet and
result in personal injury or proper-
ty damage. Wear protective cloth-
ing and boots.
Keep feet away from openings
while the product is running.
Keep hands away from the dis-
charge area.
Stop the motor and unplug the
product before leaving the prod-
uct.
Wear eye and ear protection.
Do not use a damaged power
cord.
MEANING
Indicates an imminently
hazardous situation,which,
if not avoided, will result in
death or serious injury.
Indicates a potentially haz-
ardous situation,which, if
not avoided, could result in
death or serious injury.
Indicates a potentially haz-
ardous situation, which, if
not avoided, may result in
minor or moderate injury.
(Without Safety Alert Sym-
bol) Indicates a situation
that may result in property
damage.
English
6

INSTALLATION

Do not change or make accessories that are not
recommended by the manufacturer.
Do not connect to power supply until you assemble all
the parts.
6.1

UNPACK THE MACHINE

Make sure that you correctly assemble the machine
before use.
If the parts have damage, do not use the machine.
If you do not have all the parts, do not operate the
machine.
If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
6.2

INSTALL THE UPPER HANDLE

1. Align the holes in the middle handle and the upper
handle.
2. Put the bolts(2) through the holes.
3. Tighten the handle knobs(1) onto the bolts(2).
4. Do the same operation on the other side.
12
WARNING
WARNING
WARNING
WARNING
1
2

Advertisement

Table of Contents
loading

Table of Contents