GreenWorks 2606502 Operator's Manual page 6

machine is to be stored for
an extended period.
• Maintain or replace safety
and instructions labels, as
necessary.
• Run the machine a few
minutes after throwing snow
to prevent freeze-up of the
collector/impeller.
• To prevent disconnection of
the power cord from the
extension cord during
operation. Refer to the
section entitled Using the
Cord Retainer.
• Avoid Accidental Starting –
Don't carry plugged-in
power tool with finger on
switch. Be sure switch is off
when plugging in.
• If the cord is damaged in
any manner while it is
plugged in, disconnect it
from the outlet immediately.
• Always wear safety glasses
or eye shields during
operation or while
performing an adjustment or
repair to protect eyes from
foreign objects that may be
thrown from the machine.
English
• Don't Abuse Cord – Never
carry machine by cord or
yank it to disconnect from
receptacle. Keep cord from
heat, oil, and sharp edges.
• Disconnect the power tool
from the power supply when
not in use, before servicing,
when changing
accessories, and the like.
• Read the operator's manual
carefully. Be thoroughly
familiar with the controls
and the proper use of the
equipment. Know how to
stop the unit and disengage
the controls quickly.
• Replacement Parts When
servicing use only identical
replacement parts. Replace
or repair damaged cords.
• Do not use on graveled
surface unless the machine
is adjusted for such a
surface in accordance with
the operator's manual.
• Keep Children Away – All
visitors should be kept a
safe distance from work
area.
• Keep the area of operation
clear of all persons,
7
EN