Related Manuals for GreenWorks 26272
Summary of Contents for GreenWorks 26272
- Page 1 SNOW THROWER OPERATOR MANUAL SNOW THROWER MANUEL D’OPÉRATEUR 26272/26272ME/2601102...
-
Page 2: Table Of Contents
English Description........2 Install the chute control rod......7 Operation........8 Purpose............2 Overview............ 2 Cold weather operation......8 General power tool safety Start the machine........8 Stop the machine........8 warnings........2 Adjust the discharge chute......8 Training............2 Adjust the chute deflector......9 Preparation..........3 LED headlights........... -
Page 3: Description
English DESCRIPTION GENERAL POWER TOOL SAFETY WARNINGS PURPOSE WARNING This machine is used to remove and clear away snow Read all safety warnings and all instructions. Failure to from pavements, gardens, driveways and other ground- follow the warnings and instructions may result in level surfaces. -
Page 4: Preparation
English power tool. Know how to where specifically stop the unit and disengage recommended by the controls quickly. manufacturer). • Never allow children to • The operation of any operate the power tool. powered machine can result Never allow adults to in foreign objects being operate the power tool thrown into the eyes. - Page 5 English • If the power tool should proper adjustment of the start to vibrate abnormally, snow discharge angle. stop the engine and check Keep children and pets immediately for the cause. away. Vibration is generally a • Do not overload the power warning of trouble.
-
Page 6: Maintenance
English • Use the power tool only in power tool is to be stored daylight or good artificial for an extended period. light. • Maintain or replace safety • Take all possible and instructions labels, as precautions when leaving necessary. the power tool unattended. -
Page 7: Risk Levels
English WARNING Symbol Explanation • If the parts have damage, do not use the machine. Stop the motor and remove the • If you do not have all the parts, do not operate the battery before leaving the product. machine. •... -
Page 8: Remove The Battery Pack
English REMOVE THE BATTERY PACK 3. Tighten the handle knob(2) onto the bolt(1). 4. Repeat for left/right side. INSTALL THE CHUTE DEFLECTOR 1. Open the battery door. 2. Push and hold the battery release button(1). 3. Remove the battery pack from the machine. 1. -
Page 9: Operation
English STOP THE MACHINE 5. Push the chute control rod(5) into the hole behind the deck. 6. Turn the grip handle left and right to make sure that the discharge chute moves in the same direction. OPERATION WARNING Wear eye protection during operation. 1. -
Page 10: Adjust The Chute Deflector
English ADJUST THE CHUTE DEFLECTOR OPERATION TIPS • If it is possible, clear the snow in the direction of the wind. • In strong winds, lower the chute delfector to direct the snow to the ground. • When you complete the work, let the machine opreate for a while to prevent ice formation in the discharge chute. -
Page 11: Replace The Scraper
English REPLACE THE SCRAPER 6. Install the new impeller. 7. Reinstall the components. STORE THE MACHINE • Clean the machine before storage. • Make sure the engine is not hot when you store the machine. • Make sure that the machine does not have loose or damaged parts. -
Page 12: Technical Data
Battery is too Remove battery cold. from snow throw- Greenworks hereby warranties this product, to the er. Place battery original purchaser with proof of purchase, for a period of on charger and four (4) years against defects in materials, parts or allow to charge workmanship. -
Page 13: Exploded View
EXPLODED VIEW Part No. Description C1100555-00 Impeller assembly 341021466 Weather bar 36201630AC PCB board 311081208 Cam Lock Assembly C1100544-00 Wheel Assembly 311081485 Control Rod Assembly C1100543-00 Chute Deflector Assembly 311481464 Scraper Kit Greenworks Tools PO Box 1238 Mooresville, NC 28115...
Need help?
Do you have a question about the 26272 and is the answer not in the manual?
Questions and answers
brand new snow blower won't start. Battery if charged snapped into compartment, push button and handle. Nothing happens
The GreenWorks 26272 snow blower may not start despite a charged battery due to the following possible causes:
1. Defective Switch – The switch may be faulty, preventing the machine from turning on.
2. Battery Too Cold – If the battery is too cold, the snow blower may not start. The solution is to remove the battery and place it in a warm area for 15 minutes before trying again.
This answer is automatically generated