GreenWorks 2606502 Operator's Manual page 4

wearing open sandals.
Always wear substantial
footwear.
• Operation of the power tool
in the hand-held position is
unsafe, except in
accordance with the special
instructions for such use
provided in the operator's
manual.
• Keep guards in place and in
working order.
• Don't Force Power Tool – It
will perform better and safer
at the rate for which it was
designed.
• Don't Overreach – Keep
proper footing and balance
at all times.
• If the power tool strikes a
foreign object, follow these
steps:
1.Stop machine. Release
the switch.
2.Unplug power cord.
3.Repair any damage
before restarting and
operating the power tool.
• Store Idle Power Tool
Indoors – When not in use,
power tools should be
English
stored indoors in dry,
locked-up place out of
reach of children.
• Do not operate the
equipment without wearing
adequate winter garments.
Wear footwear, which will
improve footing on slippery
surfaces.
• Never direct the discharge
toward people or areas
where property damage can
occur.
• When cleaning, repairing, or
inspecting, make certain the
collector/impeller and all
moving parts have stopped.
• Maintain Power Tools With
Care – Follow instructions
for lubricating and changing
accessories.
• Allow the power tool to run
for a few minutes after
clearing snow in order to
prevent moving parts from
freezing.
• To prevent electric shock
use only with an extension
cord suitable for outdoor
use.
• Only use identical
replacement parts and
5
EN