Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for GreenWorks 2600502
Summary of Contents for GreenWorks 2600502
- Page 1 2600502 （GWSN20130） SNA106...
-
Page 2: Table Of Contents
English Description......... 4 Operation........... 9 Purpose.............. 4 Start the machine..........9 Overview............4 Stop the machine..........9 General power tool safety Use the cord retainer..........9 Adjust the discharge chute.......10 warnings..........4 Adjust the chute deflector........10 Safety warnings..........4 Operation tips..........10 Double insulated snow thrower...... -
Page 3: Description
English DESCRIPTION • Keep Children Away – All visitors should be kept a safe distance from work area. PURPOSE • Replacement Parts When servicing use only identical replacement parts. Replace or repair damaged cords. This machine is used to remove and clear away snow from •... - Page 4 English • Thoroughly inspect the area where the equipment is to be • Do not use on graveled surface unless the machine is used and remove all stones, sticks, wires, bones, and adjusted for such a surface in accordance with the other foreign objects.
-
Page 5: Double Insulated Snow Thrower
English • After striking a foreign object,turn the machine off and user. All exposed metal parts are isolated from the remove the plug, and then inspect it for damage. Repair internal metal motor components by protecting insulation. any damage before restarting and using the machine. IMPORTANT •... -
Page 6: Symbols On The Product
English Symbol Explanation Keep hands away from the discharge area. Ampere rating (on the plate) Stop the motor and unplug the prod- 2.1 - 3.0 - 5.1 - 7.1 - 12.1 - uct before leaving the product. 12.0 16.0 Cord Wire size (A.W.G) Wear eye and ear protection. -
Page 7: Unpack The Machine
English UNPACK THE MACHINE INSTALL THE MIDDLE HANDLE WARNING Make sure that you correctly assemble the machine before use. WARNING • If the parts are damaged, do not use the machine. • If you do not have all the parts, do not operate the machine. -
Page 8: Install The Chute Control Rod
English INSTALL THE CHUTE CONTROL NOTE Lower the scraper to the ground to remove the snow. WARNING Keep bystanders a safe distance from the machine. WARNING Examine the work area. Remove all stones, sticks, wire, bones, and other debris that can ricochet because of the rotating impeller. -
Page 9: Adjust The Discharge Chute
English NOTE WARNING Do not plug the extension cable into the outlet until it has Release the bail switch before you adjust the chute been connected to the cord retainer and plugged into the deflector. machine. WARNING 1. Fold the extension cable to form a tight loop near the Do not push the deflector so far forward that a gap shows retainer. -
Page 10: Replace The Scraper
English REPLACE THE SCRAPER 2. Remove the nut. WARNING 3. Remove the 5 screws and side wear pad that secure the Use only approved replacement scrapers. left side cover. WARNING Wear heavy gloves or wind cloth around the impeller when you touch the impeller. -
Page 11: Store The Machine
English 5. Using a socket wrench, remove the large pulley. 9. Reinstall the left side plate, large pulley, belt and left side cover. STORE THE MACHINE • Clean the machine before storage. • Make sure the motor is not hot when you store the machine. -
Page 12: Technical Data
(3) years against defects in materials, parts or workmanship. Greenworks, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. -
Page 13: Exploded View
English EXPLODED VIEW Part No. Description R0200759-00 Impeller assembly R0200761-00 Scraper Kit R0200287-00 Wheel Assembly R0200166-00 Control Rod Assembly R0200283-00 Weather bar R0200757-00 Cam Lock Assembly R0200760-00 Chute Deflector Assembly...