Table of Contents
Advertisement
Quick Links
Wired DMX Low Voltage Lighting Controller (LCB-DMX1) /
Wired 0-10V Control 8 Channels Lighting Controller (LCB-010V8)
Deployment Guide
Document Number:
009-1747-00
Document Date:
November 2018
Document Supports:
da Vinci 8.9
Copyright © 2018 Savant System, LLC
45 Perseverance Way, Hyannis, MA 02601
Savant.com
| 508.683.2500
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Savant LCB-DMX1
Summary of Contents for Savant LCB-DMX1
- Page 1 Wired DMX Low Voltage Lighting Controller (LCB-DMX1) / Wired 0-10V Control 8 Channels Lighting Controller (LCB-010V8) Deployment Guide Document Number: 009-1747-00 Document Date: November 2018 Document Supports: da Vinci 8.9 45 Perseverance Way, Hyannis, MA 02601 Copyright © 2018 Savant System, LLC Savant.com...
-
Page 2: Table Of Contents
To access the link to the topics in this document, click the topic page. Introduction ............................................4 Deployment Steps ........................................4 Equipment Overview ........................................5 3.1. Box Contents and Specifications (LCB-DMX1) ............................. 5 3.2. Right and Left Panel Descriptions ................................5 3.3. Box Contents and Specifications (LCB-010V8) ........................... 6 3.4. - Page 3 Before installing, configuring, or operating any equipment and other, All safety instructions below should be read, understood, and applied Savant recommends that each dealer, integrator, installer, etc. access under all relevant circumstances when working with this equipment. and read all the relevant technical documentation. Savant technical Read these instructions.
-
Page 4: Introduction
1. Introduction This document will guide the installer/integrator through the process of installing, configuring, and adding the following devices to a Savant Pro System. – Savant Wired DMX Low Voltage Controller (LCB-DMX1) – Savant Wired 0-10V Control 8 Channel Lighting Controller (LCB-010V8) -
Page 5: Equipment Overview
3. Equipment Overview Both Smart Hosts have the same connections, box contents, and specifications. 3.1. Box Contents and Specifications (LCB-DMX1) 3.2. Right and Left Panel Descriptions Right Panel Box Contents (1) DMX Controller (LCB-DMX1) (1) Install Kit (075-0218-01) (1) 5 VDC, 10 Watt Power Adapter (025-0192-xx) -
Page 6: Box Contents And Specifications (Lcb-010V8)
Off - During normal operation. Reset - Press and release to perform a hard reset. Status LED will illuminate while button is pressed. Wired DMX and 0-10V Lighting Controller Deployment Guide Copyright © 2018 Savant Systems, LLC 009-1747-00 | 181116... -
Page 7: Connections
End Of Line Terminator. SET DIP SWITCH TO ON • Savant recommends that the DMX signaling cable not be run WHEN LIGHT IS THE LAST in the same conduit as the high voltage AC lines. -
Page 8: Volt Controller (Single Channel)
Up to 8 lighting fixtures per output port is supported. • See the USAI Lighting - Products Specification Sheets located on the Savant Customer Community for information regarding the individual lighting fixtures. Wired DMX and 0-10V Lighting Controller Deployment Guide Copyright ©... -
Page 9: Volt Controller (Dual Channel)
Up to 8 lighting fixtures per output is supported. • See the USAI Lighting - Products Specification Sheets located on the Savant Customer Community for information regarding the individual lighting fix- tures. Wired DMX and 0-10V Lighting Controller Deployment Guide Copyright ©... -
Page 10: Led Strips (5 Meter)
1/R- Red Light Component 2/G- Green Green Light Component No Connection No Connection 3/B- Blue Blue Light Component 4/W- White White Light Component Wired DMX and 0-10V Lighting Controller Deployment Guide Copyright © 2018 Savant Systems, LLC 009-1747-00 | 181116... -
Page 11: Led Strips (10 Meter)
NOTE: The wire colors shown in the diagram Brown = Hot do not represent any standard. Colors in diagram are used to distinquish INPUT OUTPUT individual wires. HLG-240H-24 POWER SUPPLY Wired DMX and 0-10V Lighting Controller Deployment Guide Copyright © 2018 Savant Systems, LLC 009-1747-00 | 181116... -
Page 12: Blueprint Configuration - Add Controller
Please add one or more Lighting Devices to your configuration Through SAM (Savant Application Manager), open an existing configuration into Blueprint. From the menu bar, select Tools > Savant Lighting and + − Sync... Keypads. From within the Devices/Controllers tab, select the Add icon. -
Page 13: Obtain Uid Of Controller
Family Room Location: Address: Double-click the UID field and add the UID. 985DADD167BE0070 UID: + − Bind Sync... Wired DMX and 0-10V Lighting Controller Deployment Guide Copyright © 2018 Savant Systems, LLC 009-1747-00 | 181116... -
Page 14: Scan For Controller
Savant Wired DMX Controller Connect Start DMX Scan Web Configure DMX Control - Family Room 985DADD6AF0B0070 + − Sync... Opens DMX OLA Server Web UI Wired DMX and 0-10V Lighting Controller Deployment Guide Copyright © 2018 Savant Systems, LLC 009-1747-00 | 181116... -
Page 15: Blueprint Configuration - Ola Server
Appendix A: OLA Server - Additional Information HELPFUL! When connected to the OLA Server, all control to the Savant Control System is lost. Be sure to close out of the OLA Server before uploading configuration to the Host. -
Page 16: Configure Lighting Drivers - Rdm Tab
For more information regarding each of the fields in the RDM tab, refer to Appendix A: OLA Server - Additional Information. Configure LED Drivers (Lighting Fixtures and LED Strips) With the Savant Lighting Universe selected, select the RDM tab. Home Settings RDM Patcher... - Page 17 • To stop the blinking/flashing, uncheck the same box and select Save. Wired DMX and 0-10V Lighting Controller Deployment Guide Copyright © 2018 Savant Systems, LLC 009-1747-00 | 181116...
-
Page 18: Light Fixture Addressing - Rdm Patcher Tab
To move a device to a different address, select, drag, and drop the device to its new location. Free slots: first 13, last: 512, max contiguous: 500 Wired DMX and 0-10V Lighting Controller Deployment Guide Copyright © 2018 Savant Systems, LLC 009-1747-00 | 181116... -
Page 19: Optional: Test Communications - Dmx Console Tab
Clear Bulb - Instantly changes the intensity of all 512 0 0 0 0 0 0 0 0 0 channels to 0 (off). 0 0 0 0 0 0 0 0 0 Wired DMX and 0-10V Lighting Controller Deployment Guide Copyright © 2018 Savant Systems, LLC 009-1747-00 | 181116... -
Page 20: Blueprint Configuration - Add Fixtures To A Smart Group
Double-click the smart group and rename to something that identifies the group. The name entered is what is populated in the Savant Pro App. Lighting /Keypad Manager for Smith Residence Drag and drop all fixtures that need to be added into that... -
Page 21: Blueprint Configuration - Update Data Table
On/O Blink Sync... Checked - For boxes that are checked: NOTE: Savant recommends adding a check to the Loads and Scenes • An entry for each box checked is added to the Sync Data Table for Controller: Smith Residence lighting data table (Tools > Settings > Lighting) When the box is selected it will add/rename/delete entries in the lighting data table to match the current wireless lighting configuration. -
Page 22: Blueprint Configuration - Upload Configuration
With the configuration complete, it can now be uploaded to the Savant Pro System Host. Follow steps below to uploaded. IMPORTANT! When connected to the OLA Server, all control to the Savant Control System is lost. Be sure to close out of the OLA Server before upload- ing configuration to the Host. -
Page 23: Savant Pro App
10. Savant Pro App With the upload complete, the DMX lighting network will either create a Lighting Service in the Savant Pro 8 App or get added to an existing Lighting Service. See the Pro 8 App Lighting Service User Guide (009-1696-xx) which is available on the Savant Customer Community. -
Page 24: Appendix A: Ola Server - Additional Information
Appendix A: OLA Server - Additional Information SETTINGS TAB Below are descriptions of the fields in the Settings tab of the Savant Lighting Universe Home Settings RDM Patcher DMX Monitor DMX Console Universes Universe Settings Savant Lighting – Universe Id - The Savant Lighting Universe ID is automatically... - Page 25 The Status LED on the controller will begin blinking once per second and all lighting fixtures connected to the controller will begin flashing. Uncheck the same box and select Save to stop the blinking/flashing. Manufacturers Label - Displays the manufacturer (Savant) of the controller and can’t be modified. The label set in this field also appears in the left panel of the OLA Server.
- Page 26 RDM TAB (Lighting Fixtures and LED Strips) Below are descriptions of the fields in the RDM tab of the Savant Lighting Universe for a DMX lighting fixtures and LED strips. DMX Personality - Set the color space supported on the lighting fixture.
- Page 27 Product Details - Information regarding the lighting fixture is presented. Sensor 0 (DMX Light Fixture Only) - Displays the internal temperature recorded by the temperature sensor embedded in the lighting fixture. Wired DMX and 0-10V Lighting Controller Deployment Guide Copyright © 2018 Savant Systems, LLC 009-1747-00 | 181116...
-
Page 28: Appendix B: Network Requirements
Managing IP Addresses To ensure that the IP Address will not change due to a power outage, a static IP Address or DHCP reservation should be configured. Savant recommends using DHCP reservation within the router. By using this method, static IP Addresses for all devices can be managed from a single UI avoiding the need to access devices individually. - Page 29 Savant Systems, LLC. shall not be liable for any technical or editorial errors or omissions contained herein or for incidental or consequential damages resulting from the performance, furnishing, reliance on, or use of this material.
Need help?
Do you have a question about the LCB-DMX1 and is the answer not in the manual?
Questions and answers