A Access To The Ewon Cosy; Assign An Ip Address; Talk2M Account Configuration - HMS Ewon Cosy+ User Manual

Appendix A: Access to the Ewon Cosy+
A Access to the Ewon Cosy+
In this section, we will explain how to configure your Ewon Cosy+ using the Wizard Embedded
setup:
1. Assign an IP address to your Ewon Cosy+, different than the default IP address.
2. Register your Ewon Cosy+ to a Talk2M account.
3. Access the web interface of the Ewon Cosy+.
4. Configure your Ewon Cosy+ using the Embedded Wizard Setup.
A.1

Assign an IP Address

You can establish the first communication with the Ewon Cosy+ using the eBuddy application
(check Software, p. 4
By default, the IP address of the Ewon Cosy+ is set to 10.0.0.53 which in some circumstances
might need to be changed.
To change the IP address of the Ewon Cosy+, proceed as follows:
1. Connect the port labeled as
This can be done either point-to-point (computer <> Ewon Cosy+) or through a network if
the default IP of the Ewon Cosy+ will not conflict with another connected device.
2. Start the eBuddy application.
The application scans through the Ethernet adapter network, identifies the connected Ewon
devices and display their IP address, subnet mask and serial number.
eBuddy also allows the modification of the default IP address without necessarily being in
the same network range.
3. Optional: Highlight the row representing the device to be modified.
4. Click on the button Set IP from the top bar menu.
5. Indicate the serial number of the Ewon Cosy+ that you want to modify.
If you went through step #3, the serial number is provided automatically.
►
6. Click Next.
7. Enter the
→ By clicking Next, eBuddy sends the commands to the Ewon Cosy+ to change its IP address
and to reboot.
8. Once the reboot completes, you can access the Ewon Cosy+ using its new LAN IP address.
A.2

Talk2M Account Configuration

Talk2M offers a secured and easy way to set up a remote connection over the Internet.
To allow the remote access, you need to link the Ewon Cosy+ to the Talk2M infrastructure, more
specifically to a Talk2M account.
To configure the Talk2M account:
Ewon Cosy+ User Manual
for more details about eBuddy).
LAN (port #1)
<new IP address> and its
of the Ewon Cosy+.
<subnet mask>.
21 (32)
UM-0005-00 1.0 en-US