Yetter TITAN Series Operator's Manual page 8

Hide thumbs Also See for TITAN Series:

Table of Contents

INSTALLATION INSTRUCTIONS

NOTE: For models with residue managers go to STEP 4.

STEP 3. For coulter only models, Attach the blade to the coulter arm assembly using the

4) ½" x 1-1/4" carriage bolts, hex nuts, and lock washers. Fully tighten the carriage bolts.

Torque to 85 ft/lbs.

STEP 4. Align the coulter hub/blade to the planter row unit opener blades. Set the

coulter blades to run perpendicular to the soil. Fully tighten the 3) ½" x 1-1/2" bolts on the

coulter bracket to the planter row unit. Torque to 85 ft./lbs.

Table of Contents

2967-007a