Interface Description; Serial Interface; Usb 1.1-Interface; Transmission Protocol - Henry Schein OneStepPlus User Manual

13. Interface Description

The instrument may be connected to a computer via the RS232 or the
USB-interface (work station or laboratory information system).

13.1 Serial Interface

Protocol RS232, 19200 Baud, 8 bit, no parity (Picture 3.3-4)
Connection plug arrangement:
Pin Signal
1 Nc
2 RxD
3 TxD
4 Nc
5 GND
6 Nc
7 Nc
8 Nc
9 Nc

13.2 USB 1.1-Interface

USB-jack Type B (Pic. 3.3-5). The instrument will be identified as a serial
interface. The driver for the interface module may be downloaded from the
company homepage.

13.3 Transmission Protocol

The data is released via the interfaces as plain text. The received dataset
corresponds to the format of the printout.
Manual EN V2.00 / 06-2009
Description
Not wired
Data reception
Send
Not wired
Signal ground
Not wired
Not wired
Not wired
Not wired
User manual
Direction
Input
Output
--
47