Changing The Sequence Number ("Sn"); Transferring Data To A Pc - Henry Schein OneStepPlus User Manual

Attention:
A new ID cannot be entered before the present analysis has been
completed.

5.5 Changing the sequence number ("SN")

Pressing the field
new sequence number using the keys on the pad. All following
measurements will now be counted from this number on.

5.6 Transferring data to a PC

The results may be transferred to a PC via the USB- or RS232-interface.
A detailed description of the interface can be found in Chapter 13 Interface
Description.
Manual EN V2.00 / 06-2009
in the start menu brings up a numerical pad. Enter a
Display 7 : Seq.-Input
User manual
21