Henry Schein OneStepPlus User Manual page 7

Notice:
The stick will be drawn into the instrument after 30 sec.
After approximately 60 sec the result will be displayed on the screen
(Display 2) and transferred to the printer and interfaces.
By pressing the printer symbol (Display 2-2) the result can be printed again.
Choosing the return panel (Display 2-3) will lead back to the start screen.
Another analysis may be started by applying the next test stick.
Notice :
To start a new measurement it is not necessary to go back to the start
screen. A new stick is detected at any time and the measurement is
then started automatically.
Manual EN V2.00 / 06-2009
Display 2 : Result
User manual
2
3
7