Quickstart - Henry Schein OneStepPlus User Manual

User manual

1. Quickstart

Unpack the instrument and place it on an even, hard surface. Connect the
power supply and turn the equipment on with the On/Off-switch (Pic. 3.3-8).
After the self test the start screen will appear on the display.

Dip a test stick into the urine sample for approx. one second.

Blot by touching the edge of the strip to a paper towel to remove
excess urine.

Place the strip on the strip holder

Slide or push the strip to the end of the channel. Do not touch the
reagent pads on the test strip.
The instrument will automatically detect an applied strip. The measurement
cycle will be started. A progress bar on the display shows the remaining
measurement time.
Note: If "Autostart" (Chapter 9.5) is deactivated, the measurement must be
started using the start control panel (Display 1-1).
Manual EN V2.00 / 06-2009
1
Display 1 : Start menu
6