Display Of Results; Measurement Errors - Henry Schein OneStepPlus User Manual

5.2 Display of Results

The sequence number (Display 4-1) as well as the patient identification
(Display 4-2) will be displayed with the results.
Positive findings are clearly marked by an asterisk (*) on the printout and
on the display (Display 4-3). Additionally, it is possible to enable an
acoustic signal on positive findings.
The printout is light-sensitive and may turn yellow when exposed to light
during storage. For archiving purposes the printouts should be kept in a
dark place (patient file) or as a photocopy.
The result displayed may be printed again by pressing (Display 4-4). The
return panel (Display 4-5) will lead back to the start screen.

5.3 Measurement Errors

If the display shows "Measuring Error ..." instead of a result please read the
instructions in Chapter 14. "Error Messages and Fault Clearance".
Repeat the measurement. In case of permanent errors please contact the
service (16. Customer Service).
Manual EN V2.00 / 06-2009
1
2
3
3
Display 4 : Result
4
5
User manual
19