Selecting The Day - Henry Schein OneStepPlus User Manual

User manual

7.2.1 Selecting the Day

By pressing the panel "Day" (Display 13-9) you will reach the menu
displayed below.
Display 14 : Select day
Set the day with the buttons (Display 14). Selecting "Date" will bring up a
screen with the list of available dates (only days with measurements are
shown on the screen). Select the desired date with the up-and-down
arrows and confirm your selection by pressing . After confirmation
your selection will be displayed on the screen 'SET FILTER PAR.'
Manual EN V2.00 / 06-2009 26