Entry Of Test Sticks' Lot - Henry Schein OneStepPlus User Manual

User manual

12.2.1 Entry of test sticks' LOT

If LOT-control is activated, the actual LOT-number of the test strips can be
entered using 'Strip' in the menu 'Settings'.
When selecting "LOT number" a numerical pad will appear, which can be
used for entering the LOT printed on the stick packaging. If the entry does
not have the format expected for a LOT number, an error message will
appear.
After entering the LOT, information on the number of strips from that LOT is
requested. If three boxes of the same LOT are present, please enter '300'
for the number of strips.
Display 25 : LOT code
NOTICE:
The instrument counts the number of strips. If the number of
measurements reaches the previously entered number of strips of that
LOT the instrument requests to enter a new LOT-number. Then, please
enter the LOT number of the strips you want to use.
Manual EN V2.00 / 06-2009
Display 26 : LOT size
42