Technical Data - Philio PHI PST02-1B Quick Start Manual

Z-wave 3 in 1 sensor (motion, illumination, temperature)

Quick start manual (8 pages)

Table of Contents

Size: 1 Byte, Default Value: 4

Setting

0 - 127

Parameter 10: Auto Report Battery Time

The interval time for auto report the battery level. 0 means turn off auto report battery.The default value is 12. The tick time can setting by the conﬁguration

Size: 1 Byte, Default Value: 12

Setting

0 - 127

Parameter 12: Auto Report Illumination Time

The interval time for auto report the illumination. 0 means turn off auto report illumination.The default value is 12. The tick time can setting by the conﬁgurat

Size: 1 Byte, Default Value: 12

Setting

0 - 127

Parameter 13: Auto Report Temperature Time

The interval time for auto report the temperature. 0 means turn off auto report temperature.The default value is 12. The tick time can setting by the conﬁgura

Size: 1 Byte, Default Value: 12

Setting

0 - 127

Parameter 20: Auto Report Tick Interval

The interval time for auto report each tick. Setting this conﬁguration will effect conﬁguration No.10, No.11, No.12 and No.13.Caution: Setting to 0 means turn

report function.

Size: 1 Byte, Default Value: 30

Setting

0 - 255

Parameter 21: Temperature Differential Report

The temperature differential to report.0 means turn off this function. The unit is Fahrenheit.Enable this function the device will detect every minutes. And wh

temperature is over 140 degree Fahrenheit, it will continue report.Enable this functionality will cause some issue please see the detail in the u201cTempera

Reportu201d section.

Size: 1 Byte, Default Value: 1

Setting

0 - 127

Parameter 22: Illumination Differential Report

The illumination differential to report.0 means turn off this function. The unit is percentage.Enable this function the device will detect every minutes. Enable

functionality will cause some issue please see the detail in the Illumination Report section.

Size: 1 Byte, Default Value: 0

Setting

0 - 99