Warning! Verify that the power select switch on your unit matches the line voltage applied. All fixtures must be connected to circuits with a suitable Earth Ground. LG-60 User Manual User Manual Power cord Figure 1 - AC Voltage Switch Not all fixtures have a voltage select switch.
There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact CHAUVET. LG-60 User Manual usage and maintenance? 11/14/2007 6:04:00 PM...
NTRODUCTION Your LG-60 is very unique! You may notice that the beams coming out of the projector are larger than the 4.95mW projectors. There is a very distinct reason for this. Unlike 4.95mW projectors the output of the CHAUVET laser projectors with Fatbeam™ technology inside outputs <20mW for each beam.
Product Overview Dipswitch settings for DMX addressing & other functions connectors LG-60 User Manual DANGER: Laser Radiation emitted from this aperture. Before connecting the unit to AC power, make certain that the front aperture is pointed away from you or others.
• Be sure all equipment necessary to operate the system gas arrived intact. • In the event that damage has been found or parts are missing, please contact CHAUVET customer support for further instructions. • Please do not return the unit to your dealer without first contacting CHAUVET customer support.
OMPLIANCE TATEMENT Your LG-60 complies with FDA/CDRH 21CFR1040 and Laser Notice 50 as well as IEC 60825- 1:2003. Due to a unique optic design, this product does not exceed output powers that exceed its classification and output levels government agencies have determined to be appropriate for the products function.
CHAUVET offers a range of items, which are ideal for safe mounting. It is the responsibility of the manufacturer to provide useful instruction on the proper use of this product.
DMX Mode In this mode you will be able to control each individual trait of the fixture independently. The LG-60 occupies 7 channels of DMX control. For detailed listing of the DMX channel values and laser patterns refer to the Appendix section.
Turn switch to the Slave position on the slave units, and they will react the same as the Master. Mode Slave POWER 1: MASTER LG-60 User Manual Dipswitches 10 = Off, 11 = Off, 12 = Off 10 = Off, 11 = Off, 12 = On 2: SOUND/AUTO...
DMX-512 1: DMX Note! System doesn’t use DMX controller in Master-Slave Mode. System may not set to two Master units in Master-Slave Mode. LG-60 User Manual Dipswitches 10 = On, 11 = Off, 12 = On 2: DMX Appendix POWER...
XLR male to female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+). CHAUVET carries 3-pin XLR DMX compliant cables, DMX-10 (33’), DMX-4.5 (15’) and DMX-1.5 (5’)
If the test pattern is not in the proper position restart the AC power by turning off the AC switch and leaving off for 15 seconds and then turning the switch back to the on position. After trying the above solution you still have a problem, please contact CHAUVET. LG-60 User Manual...
Package must be clearly labeled with a Return Merchandise Authorization Number (RA #). Products returned without an RA # will be refused. Call CHAUVET and request RA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.