Mounting; Orientation; Rigging - Chauvet COLORado 6 User Manual

Mounting

Orientation

This fixture may be mounted in any safe position.

Rigging

The fixture includes a mounting yoke to which a rigging
clamp can be attached. You must supply your own clamp
and make sure the clamp is capable of supporting the
weight of this fixture. It is recommended to use at least 2
mounting points per fixture. You can order "C" and "O"-
clamps from any CHAUVET dealer or distributor: CLP-15,
CLP-06, CLP-16
1.
2.
3.
Caution! After prolonged periods of operation, the fixture
chassis may reach high temperatures. This fixture
must be mounted in a ventilated location, as it is
convection cooled.
COLORado™6 User Manual
Block access below the work area and use
suitable and stable platform when installing or
servicing fixture.
Safety cables must always be used, utilizing the
provided safety attachment points. The safety
cable must be capable of holding 10 times the
weight of the fixture.
Verify the structure can hold 10 times the weight
of all to-be installed fixtures.
10
Hanging Clamp
Note!
Clamp is sold separately.
1/15/2008 11:12 AM