Berger & Schroter LN-G3-B50 User Manual page 38

RE-FORMATTING 64GB & 128GB MICRO-SD CARDS TO FAT32 FORMAT:
Any micro-SD card above 32GB needs to be re-formatted from EXFAT format to
FAT32 format, which is the format of the night vision monocular (and many other
consumer electronics). Please note that FAT32 is the most widely used format and
is also considered the most reliable format.
In order to re-format the card you must run it through a 3rd party provider. We sug-
gest using Disk Partition. While nearly all of the providers would want you to buy
their upgraded versions, you can just download their basic free version and it would
be sufficient to re-format the card. Disk Partition seems to be the most simple and
hassle-free provider we could find:
https://www.disk-partition.com/download.html
- Download the "Standard Free" version and follow all the download instructions.
- Once downloaded, open the program and insert the micro-SD card into the com-
puter.
- Highlight the correct disc by single-click and then choose on the bottom left side
of the menu to "Format Partition" (alternatively right-click on the highlighted disc
and choose the same function). A pop-up window will appear. You can label your
partition (such as "Luna Optics Monocular" or any other name you desire (it's op-
tional) and then make sure to select "FAT32" as the File System. Then click "OK".
- Once the format is finished, click on "Apply" located in the most upper left corner.
You must select "Apply" otherwise the formatting is not finished.
-You card is now formatted, but before you can use your 64/128GB card in our di-
gital night vision product you must also format the card inside the product. To do
so, insert the card into its slot (11-c), turn your monocular on and through the menu
find and select "Format", then select "OK". Once the card is formatted inside the
night vision device it is now ready to use.
38