View Mode; Record Mode - Berger & Schroter LN-G3-B50 User Manual

MAIN MENU consists of the following selections:

VIEW MODE:

- DAYTIME: this setting presents image in natural full color, best suited for daytime
viewing and recording.
- BLACK & WHITE: this setting presents the image in monochrome black and white
color (preferred for nighttime urban settings).
- GREEN: this setting presents image in traditional night vision green color (good
for nighttime field settings).
- AMBER: this setting presents image in soft Amber color (good for highly detailed
image during variety of low-light conditions and for car headlights glare).
SEE PAGE-31 FOR MORE INFORMATION ON IMAGE COLOR SELECTION.

RECORD MODE:

- VIDEO: In this mode short pressing the Camera/LRF button (4) starts or ends
video recording (SEE PAGE-33 FOR MORE INFORMATION).
- PHOTO: In this mode short pressing the Camera/LRF button snaps a still image
(SEE PAGE-33 FOR MORE INFORMATION).
WI-FI:
- OFF: Wi-Fi is turned OFF (default setting)
- ON: Wi-Fi is turned ON (SEE PAGE-36 FOR MORE INFORMATION).
RANGEFINDER:
- RANGING MODE: Opens sub-menu as follows.
OFF: Laser Rangefinder is OFF.
ON (MANUAL): Laser Rangefinder is in manual mode – user can measure distance
by pressing on holding the Camera/LRF button for 2 seconds.
ON (AUTO): Laser Rangefinder is in automatic mode – it will continuously measure
the distance every 2-3 seconds.
- RANGING UNIT: Opens sub-menu as follows.
YARD: distance will be measured in Yards.
METRE: distance will be measured in Meters.
PLAYBACK:
- Selecting this mode will allow you to review and play back the images and videos
directly on your binocular. To exit this mode press and hold the Controller for 2 se-
conds.
SETTINGS:
- Opens the Settings Chapters as follows:
SETTINGS MENU consists of the following selections:
EIS (Electronic Image Stabilizer):
- OFF: Electronic Image Stabilizer is turned off (default setting).
- ON: Electronic Image Stabilizer is turned on (SEE PAGE-34 FOR MORE INFOR-
MATION).
28