Berger & Schroter LN-G3-B50 User Manual page 36

PHOTO: To take a still image, access Main Menu, then enter Record Mode function
and select Photo. Then focus the unit onto the object you are viewing and with a
steady hand gently press the CAMERA button momentarily. The display will give a
visual countdown (3-2-1) and then image is taken and is automatically stored onto
the SD card. All still images are taken at 5360x3008 resolution (16.1MP).
IMPORTANT: once your micro-SD card reaches its capacity, video recording and
still image taking will no longer be possible and "SD Card" will be displayed, indi-
cating it is time to either replace the card or empty your current card. This feature
acts as a safeguard to prevent accidental over-writing your existing video and photo
files.
IMPORTANT: If you see "Memory Error" message displayed, your micro-SD card
is either bad, or, if you have a 64GB or 128GB card, it is not operating in FAT32 for-
mat. Please refer to pages 37-38 for re-formatting instructions.
DATA VIEWING AND DATA TRANSFER OPTIONS:
It is possible to view the images and videos directly on the unit's micro-display. To
do so, while the unit is operating access the Main Menu and choose "Playback".
Once in the Playback Mode you will be able to switch between photos and videos
by rotating the Menu Controller and short-pressing Controller will activate any video
file. To exit the Playback Mode simply press Menu Controller for 2 seconds. NOTE:
if you need to edit or delete files, you must remove the micro-SD card from device
and do this operation on your computer.
Alternatively, you can remove the micro-SD card from the monocular and use it di-
rectly via the micro-SD card slot in your laptop, or if you don't have a direct slot,
use it in the included USB flash drive adapter to transfer data to your computer.
Carefully open the Connection Area rubber cover by gently pulling it from the left
side outward and then swing it counterclockwise to the right and locate the Micro-
SD Card Slot. Gently push onto the micro-SD card and it will pop out. It is also
possible to utilize the full-size SD card adapter (not included with binocular). To re-
place the micro-SD card gently push it back into the slot until it clicks and stays in
it. Do not use force when removing or replacing the Micro-SD card from the
slot!
CONNECTING TO EXTERNAL VIDEO SOURCE:
You can connect your device to the TV or a video mo-
nitor, via the RCA video cable (included with your de-
vice). Video output is located at the front of the
binocular. Please use the included video cable, which
has a special curved plug in order to provide easy
connection to the binocular. In order to make the con-
nection, you must first access the menu and scroll
down to Settings and then find and activate the TV Out mode. Then connect the
cable between the binocular and the video monitor.
36