Berger & Schroter LN-G3-B50 User Manual page 37

IMPORTANT: Please note that when device is connected to any video monitor
orTV, it may be impossible to connect via Wi-Fi to the App during active video
recording. If you wish to connect to the Wi-Fi App, you will need to first dis-
continue video recording and then connect to Wi-Fi.
WI-FI LINK AND OPERATION INSTRUCTIONS:
1. Download "ROADCAM" App on your Android phone/tablet or on
iPhone/iPad. For Android users, if you have a problem finding the app
in Google Play Store, please scan the QR code below.
2. Enter Main Menu and scroll to Wi-Fi selection. Turn the Wi-Fi ON. Now look
through the eyepiece and observe the Wi-Fi signal name (typically
M7_followed by a set of numbers) and Password (typically
12345678).
3. Find the device Wi-Fi signal on your phone (same as shown on
the unit's display) and select it.
4. Enter password.
5. Once connected make sure your phone is allowed to stay connected to this
Wi-Fi signal even though there is no internet available. This will prevent frequent
automatic disconnects by your phone, as it tries to find a better internet connection.
6. Now open the app and it will display the device name (M7...) below the orange
cam symbol – simply touch the cam symbol and app will connect to the device.
Please note – once app is connected to the device video recording starts auto-
matically.
7. Follow on screen menu on your smart device to utilize the available features of
the app. We suggest leaving the device in Video mode, since it is possible to snap
a photo via app control at any time during live video stream.
8. During streaming it is possible to change image colors by short-pressing onto
the Controller.
9. NOTE: during Wi-Fi streaming the ZOOM function is disabled and cannot be uti-
lized!
10. NOTE: during Wi-Fi streaming long press onto the Controller deactivates Wi-Fi
function altogether.
11. If the App shuts down during normal use, please re-start it, or re-install it on
your mobile device if it happens more than twice.
37