Setting The Display Language; Setting The Date And Time; Setting Battery Parameters - Huawei ETP48400-C9A2 User Manual

ETP48400-C9A2 Embedded Power
User Manual

6.2 Setting the Display Language

After powering on the SMU, press
press

6.3 Setting the Date and Time

Set the date and time as required.
Table 6-1 Setting the date and time
Main Menu Second-Level
Menu
Setting Wizard Date and Time
NOTE

6.4 Setting Battery Parameters

Set Battery1 Connected, Battery2 Connected, Battery3 Connected, Battery4 Connected,
Rated Capacity, Installation Time as required.
Table 6-2 Setting battery parameters
Main Menu Second-Level
Menu
Parameters Battery
Settings
Issue 05 (2020-04-07)
to enter the standby screen.
If an undesired language is selected, reinstall and restart the SMU and then select the desired language.
 The LCD backlight turns off if no button is pressed within 30 seconds.
 Re-login is required if no button is pressed within 1 minute.
 The preset password for login is 000001.
Third-Level
Menu
Time Zone
The date and time
Date and Time
vary with time
zones. Set the time
zone, date, and
NTP Enable
time based on the
local situation.
Third-Level
Menu
Basic
Parameters
Copyright © Huawei Technologies Co., Ltd.
or on the LCD to select a display language. Then
Default Value
UTC +08:00
Beijing
-
No
Fourth-Level Default
Menu Value
Battery1 Yes
Connected
6 Commissioning
Settings
Set to the local time zone.
Set to the local date and
time.
Yes/No
NOTE
Set the parameter to Yes if you
need to synchronize the SMU
time and the site network server
time.
Setting
Yes/No
44