Connecting The Battery Supply - Huawei ETP48400-C9A2 User Manual

ETP48400-C9A2 Embedded Power
User Manual
Procedure
Step 1 Log in to the WebUI. For details, see
WebUI.
Step 2 Access the System Settings page and set SNMP.



Step 3 In SNMP Trap, click Add, set Trap Target Address and Trap Port and set Trap
community, and choose SNMP Version.
Step 4 In Mib files, click Export to export the Mib file and then import it into the NMS.
----End
Follow-up Procedure
You can query the power system operating status, active alarms, and the names of
user-defined dry contact inputs, and configure dry contact outputs on the NMS that is
connected over SNMP.

6.8 Connecting the Battery Supply

Prerequisites
Issue 05 (2020-04-07)
 The standard protocols SNMPv1 and SNMPv2 have security risks. You are advised to use the secure
protocol SNMPv3.
 The standard encryption algorithms MD5 and DES have security risks. You are advised to use the
secure encryption algorithms SHA and AES.
There are two or more NMSs and the SNMP versions have both SNMPv1 or SNMPv2c
and SNMPv3: Set SNMP Version to ALL in SNMP, and set SNMP Port Number,
Read Community Name, and Write Community Name. Then click Add in SNMPv3,
and set User Name, MD5/SHA Password, and DES/AES Password. Then click
Confirm.
SNMPv1 or SNMPv2c: Set SNMP Version to SNMPv1&SNMPv2c in SNMP, and set
SNMP Port Number, Read Community Name, and Write Community Name.
SNMPv3: Set SNMP Version to SNMPv3 in SNMP, click Add in SNMPv3, and set
User Name, MD5/SHA Password, and DES/AES Password. Then click Confirm.
SNMP Version in this place can be different from the version in
If there is only one NMS, perform
Copyright © Huawei Technologies Co., Ltd.
6.7.1 (Optional) Setting Parameters Before Using
Step 4 once only.
6 Commissioning
Step 2.
55