Removing The Shift Lever; Removing The Clutch Cover; Removing The Clutch Discs - KTM 450 XC 2008 Repair Manual

30/DISASSEMBLING THE ENGINE

Removing the shift lever

18.5

Removing the clutch cover

18.6

Removing the clutch discs

18.7
–
Remove screw
600182-10
–
Remove screws
600187-10
–
Remove centering pin
600188-10
–
Undo screws
–
Take off pressure cap
600189-10
–
Take out clutch discs
–
Remove pressure piece
600190-11
. Take off shift lever .
 
. Remove the spring holder. Take off the clutch cover.

and dowels . Take off the clutch cover seal.
 
and remove them with the washers and springs.

.

entirely.

and the clutch push rod.

88