31/CARBURETOR
–
Screws
should not be removed.
700046-11
–
Remove screw
700047-12
–
Remove screw
Info
Only remove the throttle valve sensor if necessary. If screw
the throttle valve sensor must be readjusted.
–
Screw out the choke slide and hot start slide
600398-11
–
Remove idle air jet
–
Clean all jets and other parts thoroughly and blow out with compressed air.
Carburetor cleaner (
–
Clean the carburetor housing and blow out all channels in the carburetor with com-
pressed air.
Carburetor cleaner (
Info
700049-12
Do not use nitro thinner to clean the carburetor.
. Pull the hose connector out of the carburetor.
. Take off throttle valve sensor
.
P. 205)
P. 205)
.
is loosened,
.
148