Advertisement
WASHER
CABINET
DOOR
WASHER FLOOR
RECIRCULATING
WASH TANK
FILTERS
FILL VALVE
DRAIN VALVE
WASH PUMP
ROTATING WASH
HUB & SPRAY ARM
ASSEMBLY
SANITIZING
RINSE TANK
RINSE VALVE
FINAL RINSE
PIPING
SPECIFICATIONS
MODEL 1536-N
POT, PAN & UTENSIL WASHER
Automatic washing machine designed to wash and sanitize items commonly used in the
bakery, meat, poultry, candy and food service industries. Machine is designed to be
installed in a pit or used at floor level with a ramping system.
60" wide x 56-1/2" deep x 93" high. Clearance height: 123" (129-1/2" with optional
infrared rinse tank). Standard door opening: 32" wide x 76-1/2" high. Wash chamber:
32" wide x 38-1/2" deep x 76-1/2" high. Constructed of 12, 14 & 16 gauge, type 304
#3 finish, STAINLESS STEEL . All seams tig-welded, cleaned and polished.
Right hand or left hand swing constructed of 14 and 16 gauge, type 304 #3, STAINLESS
STEEL with integral STAINLESS STEEL framework. Door double skinned for added
strength with Heliarc welded seams. Equipped with door latch and inside release handle.
Door is interlocked with limit switch to prevent machine operation while open.
Floor constructed of 12 gauge STAINLESS STEEL formed sheets to provide maximum
strength. Floor supports constructed of 2" x 2" x 1/4" STAINLESS STEEL angle.
Heated by 208/240 or 480 volt electric immersion heaters, 18 KW total, thermostatically
controlled wash temperature with low water protection system. 90 gallon capacity
(79 gallons if infrared heated), 14 gauge STAINLESS STEEL, sloped to drain.
Infrared gas and steam heating options available.
Perforated, STAINLESS STEEL screen type. Double filter system for increased
effectiveness and easy cleaning without emptying wash tank.
Size 1/2" brass material, solenoid type for automatic.
Size 2" brass material, gate type for manual or electrically operated ball valve for
automatic option.
15 hp, 208/240 or 480 volt, 3 phase, 60 cycle. Close coupled; 250 gallons per minute
at 35 to 45 psi, mounted on 12 gauge STAINLESS STEEL formed channel base.
Water-driven STAINLESS STEEL spray arm assembly with STAINLESS STEEL jets,
removable end caps and hand-operated, quick-release mechanism for easy cleaning and
reassembly. Mounted on STAINLESS STEEL base.
STAINLESS STEEL, 20 gallon capacity, with 208/240 or 480 volt electric booster
heaters 18 KW total, to provide 180°/190° F hot sanitizing rinse. Uses 12 gallons per
30 second cycle. Infrared gas and steam heating options available, as well as pumped
rinse system
Size 1" brass material, solenoid type, automatic.
Type 304 STAINLESS STEEL tubing with brass compression fittings and brass
or optional STAINLESS STEEL full cone rinse jets.
Rev: 5/8/00
Advertisement
