Advertisement
CONTROL AND
110 volt control circuit with push pad operation of "POWER ON," "STOP" and
INFORMATION
"SHORT, MEDIUM or LONG WASH CYCLES." A digital display indicates "TIME
CENTER
REMAINING" for each cycle. LED's indicate wash, rinse and unload functions. A
buzzer is also included to provide an audible indication when the machine is ready to unload.
A programmable controller allows the push pad to be used as a "DIAGNOSTIC CENTER"
by displaying "ERROR CODES" for ease of troubleshooting. Moisture resistant gauges
measure Wash Temperature, Wash Pressure and Rinse Temperature.
OPT. WASH DOWN
Externally mounted spray hose with insulated handle for pre-rinse of heavily soiled
SPRAY HOSE
items and easy cleaning and maintenance of machine.
EXHAUST VENT
Steam exhaust vent 12-7/8" diameter, consisting of 14 gauge rolled STAINLESS STEEL,
collar bolted to the top of the machine. Machine pre-wired with control timer for the
addition of a fan.
OPTIONAL
12" diameter exhaust fan mounted on washer to extract steam after rinse cycle.
EXHAUST FAN
Constructed for moisture laden air or other air stream contaminants. Maximum temperature
160° F., 900 CFM @ 3/4" static pressure. 1/3 hp, 1750 RPM.
ELECTRIC
Constructed of STAINLESS STEEL or optional UL approved, NEMA 12 or 4X rated,
ENCLOSURE
manufactured by Electromate or Hoffman, constructed of mild steel, grey color
or stainless steel.
RACKS
Customized to hold your specific items. Constructed of STAINLESS STEEL rod and formed
angle, Heliarc welded. Supplied with STAINLESS STEEL casters and nylon wheels.
Water Inlet: 120 °F, 1" NPT
CONNECTIONS
Water Drain: 2" NPT
Overflow: 1-1/4" NPT
Electrical: Two point connection through knock out on electrical enclosure.
Steam Heating Option: 1/2" NPT
Natural or Propane Gas Heating Option: 1/2" NPT
WEIGHT
Crated: 2,800 lbs.
NOTE: All weights are approximate. Weights will vary depending on
the number of options included with the machine.
SERVICES
120 Volt -1 phase, 5 running amps, 15 amp service, plus one of the following:
Electric Wash
Elec. Spec.
Electric Booster
208 Volt
3 phase
240 Volt
3 phase
480 Volt
3 phase
1
Gas Supply: Consumption: 102,000 BTU/hr. @ 1/2 lb. pressure maximum
2
Steam Supply: Consumption: 170 lbs./hr. @ 15 psi minimum
Uncrated: 2,400 lbs.
Running Amps
Steam Wash
Steam Booster
139
39
124
37
62
19
1
2
Infrared Gas Wash
Infrared Gas Booster
39
37
19
1536-N (5/8/00)
Advertisement
