Introduction About The Integration Guide; Additional Documentation; Table 1-1 Xpico And Xpico Wi-Fi Features - Lantronix xPico XPW100A003-01-B Integration Manual

1. Introduction
About the Integration Guide
This user guide provides the information needed to integrate the Lantronix® xPico®
embedded device servers into customer-printed circuit boards. This manual is intended
for engineers responsible for integrating the xPico embedded device server into their
product.
Note: This document includes support for xPico embedded device server
versions XPC100100B-01, XPC100100S-01, XPC100100K-02, XPC10010MB-01
and XPC10010MS-01, and xPico Wi-Fi embedded device server versions
XPW100100B-01, XPW100100S-01 and XPW100100K-02. For integration
information for the Lantronix xPico Wi-Fi SMT embedded device server modules,
XPCW1002 and XPC@10003, please reference document 900-714 xPico Wi-Fi
SMT Embedded Device Server Integration Guide.
The sections in chapter 2 provide board schematic and layout recommendations for both
xPico (wired) and xPico Wi-Fi® products. Some of the sections apply to xPico (wired)
only or xPico Wi-Fi units only. Signals that are unused for a particular product can be left
floating. If the application has the potential to use both components as a stuff option it is
recommended to follow the design guide for all of the sections. The table below lists
which sections are applicable to the xPico (wired) and xPico Wi-Fi products.
Note: "xPico" (wired) refers to the Ethernet-only versions of xPico embedded
device server.
Chapter 2 Section
PCB Interface
Mating Connector
Antenna Interface
Antenna Placement
Ethernet Inteface
Serial Inteface
USB Device Port
LEDs
General Purpose IO Pins
Reset Pins
Reference Schematic

Additional Documentation

Visit the Lantronix web site at
documentation and the following additional documentation.
Document
xPico Wi-Fi SMT
Embedded Device Server
User Guide
xPico Embedded Device
xPico® Embedded Device Server Integration Guide

Table 1-1 xPico and xPico Wi-Fi Features

www.lantronix.com/support/documentation
Description
Datasheet for the xPico Wi-Fi W1002 and W1003 SMT
modules.
Provides information needed to configure, use, and
xPico (wired) xPico Wi-Fi
X
X
X
X
X
X
X
X
for the latest
X
X
X
X
X
X
X
X
X
X
8