Control Kit Pn-Zr02 - Sharp PN-V701 Installation Manuallines

5.3.Control Kit PN-ZR02

All of the displays of a video wall can be conveniently operated through one remote control
unit by installing a remote control sensor box in one of the PN-V701 of a video wall. (Up to
25 units)
Note: Connect all displays in daisy chain with RS232C cable, and attach the sensor box at
the top of the display.
The old remote controller can be used
Note: The [BRIGHT] and [VOL] buttons
to adjust brightness and volume are invalid.
You can adjust them from [MENU].
-Brightness: [MENU] - [PICTURE] - [BRIGHT]
-Volume: [MENU] - [OTHERS] - [VOLUME]
Confidential
Remote Control
Unit
Copyright © All rights reserved, SHARP CORPORATION
Remote Control
Sensor Box
This model is not compatible with
Remote Control Sensor Box
in PN-ZR01A for V55 and
in PN-ZR01 for V60 due to the
differences in an internal substrate.
64