Table of Contents
Advertisement
3.8.Precautions on stand installation 2
Stand with caster
・Take measures to prevent displays from falling in preparation for
earthquake. (e.g. by fixing displays firmly with wire or anchor etc.)
・Do not install with a stand for the purpose of carrying displays.
It may cause failures due to the vibration or collision between
displays.
・The floor stand with caster offered by CHIEF is recommended.
It is designed for adjusting the installation location. Do not install it
for the purpose of carrying displays.
Stand
Do not combine stands to install displays. It may cause
failures due to a collision between displays.
Confidential
Copyright © All rights reserved, SHARP CORPORATION
Floor stand with caster
×
37
Advertisement
Table of Contents
