Supplied Components; Preparing The Remote Control Unit - Sharp InGlass PN-LA862 Setup Manual

If any components are missing, please contact your dealer.
 Interactive Display: 1
 Remote control unit: 1
 Cable clamp: 3
 Power cord
 Remote control unit battery: 2
* Please note: do not dispose of batteries in household waste for environmental protection. Follow the disposal instructions for
your area.

Preparing the Remote Control Unit

1. Place your finger on the part marked with the ▲, and
then pull the cover off.
2. See the instructions in the compartment and put in the
supplied batteries (R03 or LR03 ("AAA" size) x 2) with
their plus (+) and minus (-) sides oriented correctly.
3. Close the cover.
6
E

Supplied Components

 Setup Manual (this manual): 1
 Touch pen: 2
 Camera mount (small): 1
 Camera screw (inch thread): 1
 Camera mount (large): 1
 USB cable: 1
 Cover SHARP logo: 1
Place this sticker onto the SHARP logo to
cover the logo.
 Camera mount screw (M3x8): 2
 Camera mount screw (M3x12): 2
PN-LA862/PN-LA752 only
 Player mount: 1
 Player mount screw (M4x6): 2