Table of Contents
Advertisement
4.4.Select uniformity mode (3)
- Sharp Advanced UCCT*
across the entire LCD monitor by properly adjusting color levels with high precision and high
definition (at the pixel level).
- The factory default setting for Uniformity is [MODE1].
You can change the mode according to the purpose of use.
■Image of color uniformity calibration
by Sharp UCCT
<Before Calibration>
Uniformity
Usage
Priority on
Mode 1
Brightness
Mode 2
Intermediate Equivalent to 600cd/㎡
Priority on
Mode 3
Uniformity
*1 SHARP Advanced Uniform Color Calibration Technology
*2 DITwC... Display Installation Tool with Calibration Utility. Refer to DITwC manual for further information.
Confidential
1
ensures uniformity of color and brightness
<After Calibration>
Brightness
Equivalent to 700cd/㎡
Equivalent to 500cd/㎡
Copyright © All rights reserved, SHARP CORPORATION
[Setting 1]
Using DITwC*
Factory
default
setting
[Setting 2]
Using a remote control unit.
[MENU]→[Picture]→[Uniformity]
2
. [UNIFORMITY]
53
Advertisement
Table of Contents
