Table of Contents
Advertisement
3.12. Precautions for horizontal installation
(Securing space and temperature conditions)
Securing space and temperature conditions
- Keep the surrounding (the
- Secure space of more than 20cm from the wall and from the floor to the display to let air flow through smoothly.
(The wind velocity should be more than 1.0m/s)
- When you install protection panel, make sure not to prevent the air flow between the display and protection panel.
Keep the temperature at the space under 40℃.
- The protection panel may be transformed or curved inward by heat depending on its material.
Consider the flexure of protection panel, load from upper part, installation method, and the material of protection panel in
installation. Secure space between the display and the protection panel of more than 10cm.
(Make sure that the protection panel won't touch the LCD surface even if it is curved.)
- Do not apply a load on the LCD surface. Do not drop anything on the LCD surface.
- Be careful not to make cables be caught between the display and mounting bracket.
Upper part of the unit
Wind velocity
more than 1.0m/S
Secure space
more than 20 cm
Floor
Confidential
★
part in the following figure) temperature under 30℃(with effective cooling system)
Protection panel
LCD surface
Lower part of the unit
more than 1.0m/S
Copyright © All rights reserved, SHARP CORPORATION
Secure space
more than 10 cm
Upper part of the unit
Wind velocity
Secure space
more than 20 cm
Lower part of the unit
Cool air flow
★
Wall
Air flow
45
Advertisement
Table of Contents
