Precautions For Mounting On The Wall - Sharp PN-V701 Installation Manuallines

3.9.Precautions for mounting on the wall 1

Precautions
- When you mount the display on the wall, check the wall carefully whether it is
strong enough to support the display. Use H beams or reinforce the wall when it is
not strong enough.
- When it is difficult to secure space for maintenance behind the display, use
mounting brackets suitable for maintenance from the front or make sure that the
display can be moved forward easily in maintenance. Or secure space behind the
display by using decorative wall.
- Secure enough space behind the cooling fans. If the space is small, the upper
displays absorb heat exhausted from the lower displays and the temperature inside
may increase.
Refer to "Precautions for temperature and clearance space" for detailed information.
- Use the mounting bracket which can support 4 times the weight of the display.
The wall (or concrete wall, concrete pillar, etc) must support 4 times the total weight
of displays and mounting brackets.
Installation mode setting on OSD (portrait or landscape)
Set installation orientation on OSD
OSD setting procedure: [MONITOR] – [LANDSCAPE/PORTRAIT]
Portrait mode: [portrait]
Landscape mode: [landscape] (Default setting)
Confidential
Copyright © All rights reserved, SHARP CORPORATION
Secure
at least
20cm
LCD
surface
Secure space
behind
Wall
39