Supplied Components; Preparing The Remote Control Unit; Attaching The Wireless Adapter - Sharp PN-LC752 Manual

If any component should be missing, please contact your dealer.
 Liquid Crystal Display Monitor: 1
 Remote control unit: 1
 Cable clamp: 3
 Power cord
 Remote control unit battery: 2
 Setup Manual (this manual): 1
 Touch pen: 2
 Camera mount: 1
 Camera mount screw (M3x6): 1
 Camera screw (inch thread): 1
* Please note: do not dispose of batteries in household waste for environmental protection. Follow the disposal instructions for
your area.

Preparing the Remote Control Unit

1. Place your finger on the part marked with the ▲, and
then pull the cover off.
2. See the instructions in the compartment and put in the
batteries (R03 or LR03 ("AAA" size) x 2) with their plus
(+) and minus (-) sides oriented correctly.
3. Close the cover.

Attaching the wireless adapter

1. Connect the supplied wireless adapter to the USB port for APPLICATION mode.

Supplied Components

 Tray: 1
 Tray mounting screws (M3x8): 4
 USB cable: 1
 Wireless adapter: 1
 Cover SHARP logo: 1
Place this sticker onto the SHARP logo to cover the logo.
Wireless adapter
(supplied)
5
E