Connecting Devices - Sharp PN-V701 Installation Manuallines

Information display

Hide thumbs Also See for PN-V701:

Table of Contents

2.9.Connecting devices 1

RS-232C/LAN

You can control display functions by PC by connecting RS-232C or LAN. (e.g. power on/off function)

We recommend connecting RS-232C or LAN to displays before installing them in higher place or other

places where it is hard to connect cables after installation. They may need in future display maintenances.

Media Devices and Peripheral Equipment

When you use media devices (e.g. personal computer, DVD player) or peripheral equipment (e.g.

distributor, video switching unit), check the connection operation of the devices boforehand.

Cable

-In analog connection, image quality might be influenced by a video board or cable. All displays requires

adjustment when installed. We recommend digital connection(e.g. HDMI, DVI, or DisplayPort connection)

for high quality images.

-When connecting DisplayPort terminal of PC that is not DP++ standard with HDMI or DVI terminal of

display, use the active type of the connecting cable (DisplayPort-HDMI(or DVI) conversion cable) and

check how it works beforehand.

-When you use light conversion cable to extend the transmission distance, EDID may not be read

accurately. Not reading EDID accurately, displays cannot display correctly. Check the image quality

beforehand when using these devices.

Confidential

Table of Contents